F3215-HP Load Balancing Module High Availability Command Reference-6PW101

4
Table 2 Command output (standard mode)
Field Descri
p
tion
Run Mode
Current VRRP working mode:
• Standard—Standard mode.
• Load Balance—Load balancing mode.
Run Method
Current VRRP running mode:
• Real MAC—Real MAC mode, which means the virtual IP address of the
VRRP group is mapped to the real MAC address of the interface.
• Virtual MAC—Virtual MAC mode, which means the virtual IP address of
the VRRP group is mapped to the virtual MAC address.
Total number of virtual routers Number of VRRP groups.
Interface Interface to which the VRRP group belongs.
VRID ID of the VRRP group.
Adver. Timer VRRP advertisement interval, in seconds.
Admin Status
Administrative state:
• UP.
• DOWN.
State
Status of the device in the VRRP group:
• Master.
• Backup.
• Initialize.
Config Pri
Configured priority of the device, or in other words, the priority value
specified by using the vrrp vrid priority command.
Running Pri
Running priority of the device, or in other words, the current priority of the
device. With VRRP tracking configured, when the state of the monitored
interface or track entry changes, the priority of the device changes.
Preempt Mode
Preemptive mode:
• Yes—The device in the VRRP group operates in preemptive mode.
• No—The device in the VRRP group operates in non preemptive mode.
Delay Time Preemption delay, in seconds.
Become Master
Time to wait before the device becomes the master. The unit is milliseconds.
Only devices in backup mode have this information.
Auth Type
Authentication type:
• None—No authentication.
• Simple—Simple authentication.
• MD5—MD5 authentication.
Key Authentication key.
Virtual IP Virtual IP address of the VRRP group.
Virtual MAC
Virtual MAC address that corresponds to the virtual IP address of the VRRP
group. It is displayed only when the device is in master state.
Master IP Primary IP address of the interface where the device in master state resides.
VRRP Track Information
Information about the tracked interface or object. It is displayed only when
the vrrp vrid track or vrrp vrid track interface command is executed.