F3215-HP Load Balancing Module High Availability Command Reference-6PW101

86
mode
Use mode to set the data transmission mode for the FTP operation.
Use undo mode to restore the default.
Syntax
mode { active | passive }
undo mode
Default
The data transmission mode use by the FTP operation is active.
Views
FTP operation view
Default command level
2: System level
Parameters
active: Sets the data transmission mode to active for the FTP operation. In this mode, the FTP server
initiates a connection request.
passive: Sets the data transmission mode to passive for the FTP operation. In this mode, the FTP client
initiates a connection request.
Examples
# Set the data transmission mode to passive for the FTP operation.
<Sysname> system-view
[Sysname] nqa entry admin test
[Sysname-nqa-admin-test] type ftp
[Sysname-nqa-admin-test-ftp] mode passive
next-hop
Use next-hop to specify the next hop for the ICMP echo operation.
Use undo next-hop to remove the next hop IP address.
Syntax
next-hop ip-address
undo next-hop
Default
No next hop IP address is configured for the ICMP echo operation.
Views
ICMP echo operation view
Default command level
2: System level