F3215-HP Load Balancing Module High Availability Command Reference-6PW101

92
password (FTP operation view)
Use password to configure a password used to log in to the FTP server.
Use undo password to remove the configured password.
Syntax
password [ cipher | simple ] password
undo password
Default
No password is configured for logging in to the FTP server.
For secrecy, all keys, including keys configured in plain text, are saved in cipher text.
Views
FTP operation view
Default command level
2: System level
Parameters
cipher: Sets a ciphertext password.
simple: Sets a plaintext password.
password: Specifies the password used to log in to the FTP server. This argument is case sensitive. If
simple is specified, it must be a plaintext string of 1 to 32 characters. If cipher is specified, it must be a
ciphertext string of 1 to 73 characters. If neither cipher nor simple is specified, you set a plaintext
password.
Examples
# Configure the password used for logging in to the FTP server as ftpuser.
<Sysname> system-view
[Sysname] nqa entry admin test
[Sysname-nqa-admin-test] type ftp
[Sysname-nqa-admin-test-ftp] password simple ftpuser
Related commands
• username
• operation
probe count
Use probe count to specify the probe times.
Use undo probe count to restore the default.
Syntax
probe count times
undo probe count
Default
An operation performs one probe.