F3215-HP Load Balancing Module High Availability Command Reference-6PW101

93
Views
DHCP operation view, DNS operation view, DLSw operation view, FTP operation view, HTTP operation
view, ICMP echo operation view, SNMP operation view, TCP operation view, UDP echo operation view,
UDP jitter operation view
Default command level
2: System level
Parameters
times: Specifies the probe times, in the range of 1 to 15.
Usage guidelines
If an operation is to perform multiple probes, the system starts the next probe when it receives responses
to packets sent in the first probe, or when the probe timeout time expires.
This command is not available for the voice operation. The voice operation can perform only one probe.
Examples
# Configure the ICMP echo operation to perform 10 probes.
<Sysname> system-view
[Sysname] nqa entry admin test
[Sysname-nqa-admin-test] type icmp-echo
[Sysname-nqa-admin-test-icmp-echo] probe count 10
probe packet-interval
Use probe packet-interval to configure the interval for sending packets in the probe.
Use undo probe packet-interval to restore the default.
Syntax
probe packet-interval packet-interval
undo probe packet-interval
Default
The interval is 20 milliseconds.
Views
UDP jitter operation view, voice operation view
Default command level
2: System level
Parameters
packet-interval: Specifies the interval for sending packets, in the range of 10 to 60000 milliseconds.
Examples
# Configure the UDP jitter operation to send packets at an interval of 100 milliseconds.
<Sysname> system-view
[Sysname] nqa entry admin test
[Sysname-nqa-admin-test] type udp-jitter
[Sysname-nqa-admin-test-udp-jitter] probe packet-interval 100