F3215-HP Load Balancing Module High Availability Configuration Guide-6PW101

124
Ste
p
Command Remarks
7. Specify the probe
timeout time.
probe timeout timeout
Optional.
By default, the timeout time is 3000
milliseconds.
This setting is not available for the UDP
jitter or voice operation.
8. Specify the TTL for
probe packets.
ttl value
Optional.
20 by default.
This setting is not available for the DHCP
operation.
9. Specify the ToS value
in the IP packet header
of probe packets.
tos value
Optional.
0 by default.
This setting is not available for the DHCP
operation.
10. Enable the routing
table bypass function.
route-option bypass-route
Optional.
Disabled by default.
This setting is not available for the DHCP
operation.
Configuring the collaboration function
Collaboration is implemented by associating a reaction entry of an NQA operation a track entry. The
reaction entry monitors the NQA operation. If the number of operation failures reaches the specified
threshold, the configured action is triggered.
To configure the collaboration function:
Ste
p
Command Remarks
1. Enter system view.
system-view N/A
2. Create an NQA operation
and enter NQA operation
view.
nqa entry admin-name
operation-tag
By default, no NQA operation is
created.
3. Specify an NQA operation
type and enter its view.
type { dhcp | dlsw | dns | ftp |
http | icmp-echo | snmp | tcp |
udp-echo }
The collaboration function is not
available for the UDP jitter and
voice operations.
4. Configure a reaction entry.
reaction item-number
checked-element probe-fail
threshold-type consecutive
consecutive-occurrences
action-type trigger-only
Not configured by default.
You cannot modify the content of
an existing reaction entry.
5. Exit to system view.
quit N/A
6. Associate track with NQA.
See "Configuring track." N/A
7. Associate track with an
application module.
See"Configuring track." N/A