F3215-HP Load Balancing Module High Availability Configuration Guide-6PW101

33
Figure 16 Network diagram
Configuring Device A
1. Configure the IP address of each interface. (Details not shown.)
2. Create VRRP group 1 on GigabitEthernet 0/1 and configure the virtual IP address as
202.38.160.111:
a. Select High Availability > VRRP from the navigation tree.
b. Click the icon corresponding to GigabitEthernet 0/1.
The VRRP group page appears.
c. Click Add.
The page for creating a VRRP group appears.
d. Enter 1 in the VRID field and 202.38.160.111 in the Virtual IP field, and then click Add to add
the virtual IP address to the Virtual IP Members field.
e. Click Apply.
Figure 17 Creating VRRP group 1
3. Configure VRRP group attributes:
a. On the VRRP group page of GigabitEthernet 0/1, click the icon corresponding to VRRP
group 1.
b. Enter 110 in the Priority field.
c. Select Preemptive from the Preempt Mode field.
d. Enter 5 in the Delay field.