F3215-HP Load Balancing Module Load Balancing Configuration Guide-6PW101

22
• If you enable slow-offline, the real service continues to process the traffic previously assigned to it,
but the LB module does not assign any new service to the real service. Remove the server or network
device from the cluster after the original services are processed to avoid service interruption.
To stop service or enable slow-offline:
1. Select Load Balance > Server Load Balance > IPv4 from the navigation tree.
2. Click Real Service.
The real service page appears.
3. Click the icon of the target real service.
The Modify Real Service page appears.
4. Click the Advanced Configuration expansion button.
Figure 18 Modifying real service
5. Select the Enable Slow-Offline or Stop Service option.
6. Click Apply.
If you select both the Enable Slow-Offline and Stop Service options for a real service, the LB module
immediately stops assigning traffic to the real service, and the slow-offline function does not take
effect.
Creating a virtual service for Layer 4 server load balancing
1. Select Load Balance > Server Load Balance > IPv4 from the navigation tree.
2. Click Virtual Service.
The virtual service page appears.