F3215-HP Load Balancing Module Load Balancing Configuration Guide-6PW101

58
Figure 48 Creating virtual service VS
Configuring LB module B
Assume that the IP addresses of the interfaces on LB module B and the zones to which they belong have
been configured.
1. Select Load Balance > Public Setting from the navigation tree.
The public parameter configuration page appears.
2. Select Keep Last-hop Information.
3. Click Apply.
Figure 49 Saving the last hop information
Verifying the configuration
A period of time after the hosts in the internal network access the Interface, you can display the statistics
on LB module A to verify load balancing configuration.
To view the traffic from Network A to Network B on LB module A:
1. Select Load Balance > Server Load Balance > IPv4 from the navigation tree.
2. Click the Statistics tab.