F3215-HP Load Balancing Module Network Management Command Reference-6PW101

85
naturemask-arp enable
Use naturemask-arp enable to enable natural mask support for ARP requests.
Use undo naturemask-arp enable to restore the default.
Syntax
naturemask-arp enable
undo naturemask-arp enable
Default
Natural mask support for ARP requests is disabled.
Views
System view
Default command level
2: System level
Examples
# Enable natural mask support for ARP requests.
<Sysname> system-view
[Sysname] naturemask-arp enable
reset arp
Use reset arp to clear ARP entries except authorized ARP entries from the ARP table.
Syntax
reset arp { all | dynamic | static | interface interface-type interface-number }
Views
User view
Default command level
2: System level
Parameters
all: Clears all ARP entries except authorized ARP entries.
dynamic: Clears all dynamic ARP entries.
static: Clears all static ARP entries.
interface interface-type interface-number: Clears the ARP entries for the interface specified by the
argument interface-type interface-number.
Usage guidelines
The command clears only the dynamic ARP entries of the interface specified by interface interface-type
interface-number.
Examples
# Clear all static ARP entries.
<Sysname> reset arp static