F3215-HP Load Balancing Module Network Management Command Reference-6PW101

106
Interface: GigabitEthernet0/1, Protocol: 6(tcp)
Global: 100.100.100.121 : 80(www)
Local : 192.168.100.101 : 80(www) vpn2
Table 24 Command output
Field Descri
p
tion
Server in private network
information
Information about internal servers.
Interface Internal server interface.
Protocol Protocol type.
Global
External IP address and port number of a server, and the VPN to which the
external address belongs.
Local
Internal IP address and port number of a server, and the VPN to which the
internal address belongs.
Related commands
nat server
display nat static
Use display nat static to display static NAT entries and interfaces with static NAT enabled.
Syntax
display nat static [ | { begin | exclude | include } regular-expression ]
Views
Any view
Default command level
1: Monitor level
Parameters
|: Filters command output by specifying a regular expression. For more information about regular
expressions, see System Management Configuration Guide.
begin: Displays the first line that matches the specified regular expression and all lines that follow.
exclude: Displays all lines that do not match the specified regular expression.
include: Displays all lines that match the specified regular expression.
regular-expression: Specifies a regular expression, a case-sensitive string of 1 to 256 characters.
Examples
# Display static NAT entries and interfaces with static NAT enabled.
<Sysname> display nat static
NAT static information:
There are currently 2 NAT static configuration(s)
net-to-net:
Local-IP : 1.1.1.0
Global-IP : 2.2.2.0