F3215-HP Load Balancing Module Network Management Command Reference-6PW101

127

natpt v4bound static

Use natpt v4bound static to configure a static IPv4/IPv6 address mapping on the IPv4 side.

Use undo natpt v4bound static to remove a static IPv4/IPv6 address mapping on the IPv4 side.

Syntax

natpt v4bound static ipv4-address ipv6-address

undo natpt v4bound static ipv4-address ipv6-address

Views

System view

Default Level

2: System level

Parameters

ipv4-address: IPv4 address to be mapped.

ipv6-address: IPv6 address to which an IPv4 address is mapped.

Usage guidelines

The ipv6-address prefix should be contained in the configured NAT-PT prefix.

Examples

# Configure a static mapping between the IPv4 address 2.3.4.9 and the IPv6 address 2001::1 on the

IPv4 side.

<Sysname> system-view

[Sysname] natpt v4bound static 2.3.4.9 2001::1

Related commands

display natpt address-mapping

natpt v4bound static v6server

Use natpt v4bound static v6server to configure a static NAPT-PT mapping for an IPv6 server.

Use undo natpt v4bound static v6server to remove a static NAPT-PT mapping for an IPv6 server.

Syntax

natpt v4bound static v6server protocol protocol-type ipv4-address-destination ipv4-port-number

ipv6-address-destination ipv6-port-number