F3215-HP Load Balancing Module Network Management Command Reference-6PW101

148
Default
The default preference of static routes is 60.
Views
System view
Default command level
2: System level
Parameters
default-preference-value: Specifies a default preference for static routes, in the range of 1 to 255.
Usage guidelines
If no preference is specified for a static route, the default preference applies.
When the default preference is re-configured, it applies to only newly added static routes.
Examples
# Set a default preference of 120 for static routes.
<Sysname> system-view
[Sysname] ip route-static default-preference 120
Related commands
• display ip routing-table
• ip route-static