F3215-HP Load Balancing Module Network Management Command Reference-6PW101

160
host-route
Use host-route to enable host route reception.
Use undo host-route to disable host route reception.
Syntax
host-route
undo host-route
Default
RIP receives host routes.
Views
RIP view
Default command level
2: System level
Usage guidelines
A router might receive many host routes from the same subnet. These routes are not helpful for routing and
occupy many resources. To solve this problem, use the undo host-route command to disable RIP from
receiving host routes.
This command takes effect only for RIPv2.
Examples
# Disable RIP from receiving host routes.
<Sysname> system-view
[Sysname] rip 1
[Sysname-rip-1] undo host-route
import-route (RIP view)
Use import-route to enable route redistribution from another routing protocol.
Use undo import-route to disable route redistribution.
Syntax
import-route protocol [ process-id | all-processes | allow-ibgp ] [ cost cost | route-policy
route-policy-name | tag tag ] *
undo import-route protocol [ process-id | all-processes ]
Default
RIP does not redistribute routes from any other routing protocol.
Views
RIP view
Default command level
2: System level