F3215-HP Load Balancing Module Network Management Command Reference-6PW101

189
7/5 translator state: Disabled
7/5 translate stability timer interval: 0
ExChange/Loading Neighbors: 0
Area: 0.0.0.1 (MPLS TE not enabled)
Authtype: None Area flag: NSSA
SPF Scheduled Count: 5
ExChange/Loading Neighbors: 0
Interface: 192.168.1.2 (GigabitEthernet0/1)
Cost: 1 State: DR Type: Broadcast MTU: 1500
Priority: 1
Designated Router: 192.168.1.2
Backup Designated Router: 192.168.1.1
Timers: Hello 10 , Dead 40 , Poll 40 , Retransmit 5 , Transmit Delay 1
Table 40 Command output
Field Descri
p
tion
OSPF Process 1 with Router ID 192.168.1.2 OSPF process ID and OSPF router ID.
RouterID Router ID.
Router Type
Router type:
• ABR.
• ASBR.
• NSSA.
• Null.
Route Tag Tag of redistributed routes.
Multi-VPN-Instance is not enabled The OSPF process does not support multi-VPN-instance.
SPF-schedule-interval Interval for SPF calculations.
LSA generation interval LSA generation interval.
LSA arrival interval LSA arrival interval.
Transmit pacing
LSU packet transmit rate of the interface:
• Interval—LSU transmit interval of the interface.
• Count—Maximum number of LSU packets sent at each
interval.
Default ASE Parameter Default ASE Parameters: metric, tag, and route type.
Route Preference Internal route priority.
ASE Route Preference External route priority.
SPF Computation count SPF computation count of the OSPF process.
RFC1583 Compatible Compatible with routing rules defined in RFC 1583.
Area Count Area number of the current process.