F3215-HP Load Balancing Module Network Management Command Reference-6PW101

221
Examples
# Configure Area 1 as an NSSA area.
<Sysname> system-view
[Sysname] ospf 100
[Sysname-ospf-100] area 1
[Sysname-ospf-100-area-0.0.0.1] nssa
Related commands
default-cost
opaque-capability enable
Use opaque-capability enable to enable opaque LSA advertisement and reception.
Use undo opaque-capability to restore the default.
Syntax
opaque-capability enable
undo opaque-capability
Default
The feature is disabled.
Views
OSPF view
Default command level
2: System level
Usage guidelines
After the opaque LSA advertisement and reception is enabled, OSPF can receive and advertise the
Type-9, Type-10 and Type-11 opaque LSAs.
Examples
# Enable opaque LSA advertisement and reception.
<Sysname> system-view
[Sysname] ospf 100
[Sysname-ospf-100] opaque-capability enable
ospf
Use ospf to enable an OSPF process.
Use undo ospf to disable an OSPF process.
Syntax
ospf [ process-id | router-id router-id | vpn-instance vpn- instance-name ] *
undo ospf [ process-id ]
Default
No OSPF process is enabled.