F3215-HP Load Balancing Module Network Management Command Reference-6PW101

233
Default command level
1: Monitor level
Parameters
process-id: Clears the statistics for an OSPF process specified by its ID in the range of 1 to 65535.
neighbor: Clears neighbor statistics.
interface-type interface-number: Clears the statistics for the neighbor connected to the specified
interface.
router-id: Clears the statistics for the specified neighbor.
Examples
# Clear OSPF statistics.
<Sysname> reset ospf counters
reset ospf process
Use reset ospf process to restart all OSPF processes or a specified process.
Syntax
reset ospf [ process-id ] process
Views
User view
Default command level
2: System level
Parameters
process-id: Specifies an OSPF process ID in the range of 1 to 65535.
Usage guidelines
The reset ospf process command:
• Clears all invalid LSAs without waiting for their timeouts.
• Makes a newly configured Router ID take effect.
• Starts a new round of DR/BDR election.
• Does not remove previous OSPF configurations.
The system prompts you to select whether to reset OSPF process upon execution of this command.
Examples
# Reset all OSPF processes.
<Sysname> reset ospf process
Warning : Reset OSPF process? [Y/N]:Y
reset ospf redistribution
Use reset ospf redistribution to restart route redistribution.
Syntax
reset ospf [ process-id ] redistribution