F3215-HP Load Balancing Module Network Management Command Reference-6PW101

253
Views
BGP view
Default command level
2: System level
Usage guidelines
You must use the default-route imported command together with the import-route command to
redistribute default routes from other protocols.
Examples
# In BGP view, allow default route redistribution from OSPF into BGP.
<Sysname> system-view
[Sysname] bgp 100
[Sysname-bgp] default-route imported
[Sysname-bgp] import-route ospf 1
Related commands
import-route
display bgp group
Use display bgp group to display peer group information.
Syntax
display bgp group [ group-name ] [ | { begin | exclude | include } regular-expression ]
Views
Any view
Default command level
1: Monitor level
Parameters
group-name: Specifies a peer group by its name, a string of 1 to 47 characters.
|: Filters command output by specifying a regular expression. For more information about regular
expressions, see System Management Configuration Guide.
begin: Displays the first line that matches the specified regular expression and all lines that follow.
exclude: Displays all lines that do not match the specified regular expression.
include: Displays all lines that match the specified regular expression.
regular-expression: Specifies a regular expression, a case-sensitive string of 1 to 256 characters.
Examples
# Display the information of the peer group aaa.
<Sysname> display bgp group aaa
BGP peer-group is aaa
Remote AS 200
Type : external
Maximum allowed prefix number: 4294967295