F3215-HP Load Balancing Module Network Management Command Reference-6PW101

258
Negotiated: send
Peer Preferred Value: 0
Routing policy configured:
No routing policy is configured
Table 58 Command output
Field Descri
p
tion
Peer IP address of the peer.
Local Local router ID.
Type Peer type.
BGP version BGP version.
remote router ID Router ID of the peer.
BGP current state Current state of the peer.
BGP current event Current event of the peer.
BGP last state Previous state of the peer.
Port TCP port numbers of the local router and its peer.
Configured: Active Hold Time Local holdtime interval.
Keepalive Time Local keepalive interval.
Received: Active Hold Time Remote holdtime interval.
Negotiated: Active Hold Time Negotiated holdtime interval.
Peer optional capabilities
Optional capabilities supported by the peer, including
BGP multiprotocol extensions and route refresh.
Address family IPv4 Unicast Routes are advertised and received in IPv4 unicasts.
Received Total numbers of received messages and updates.
Sent Total numbers of sent messages and updates.
Maximum allowed prefix number Maximum allowed prefix number.
Threshold
Percentage of received prefixes from the peer group to
maximum prefixes allowed to receive from the peer
group; If the percentage is reached, the system
generates alarm messages.
Minimum time between advertisement runs Minimum route advertisement interval.
Optional capabilities Optional capabilities enabled by the peer.
Route refresh capability has been enabled The route-refresh capability has been enabled.
ORF advertise capability based on prefix (type 64):
The BGP peer supports the ORF capability based on IP
prefix. The capability value is 64.
Local: both
The local BGP router supports both the ORF sending
and receiving capabilities.