F3215-HP Load Balancing Module Network Management Command Reference-6PW101

290
Examples
# In BGP view, configure the description information of the peer group test as ISP1.
<Sysname> system-view
[Sysname] bgp 100
[Sysname-bgp] peer test description ISP1
Related commands
display bgp peer
peer ebgp-max-hop (BGP view)
Use peer ebgp-max-hop to allow establishing an EBGP session with a peer or peer group that is on an
indirectly connected network.
Use undo peer ebgp-max-hop to restore the default.
Syntax
peer { group-name | ip-address } ebgp-max-hop [ hop-count ]
undo peer { group-name | ip-address } ebgp-max-hop
Default
This feature is disabled.
Views
BGP view
Default command level
2: System level
Parameters
group-name: Specifies the name of a peer group, a string of 1 to 47 characters.
ip-address: Specifies the IP address of a peer.
hop-count: Specifies the maximum hop count, in the range of 1 to 255. The default is 64.
Usage guidelines
You can use the argument hop-count to specify the maximum route hop count of the EBGP session.
Examples
# In BGP view, allow establishing the EBGP session with the peer group test that is on an indirectly
connected network.
<Sysname> system-view
[Sysname] bgp 100
[Sysname-bgp] peer test ebgp-max-hop
peer enable (BGP view)
Use peer enable to enable the specified peer.
Use undo peer enable to disable the specified peer.
Syntax
peer ip-address enable