F3215-HP Load Balancing Module Network Management Command Reference-6PW101

292
Examples
# In BGP view, configure a fake AS number of 200 for the peer group test.
<Sysname> system-view
[Sysname] bgp 100
[Sysname-bgp] peer test fake-as 200
peer filter-policy (BGP view)
Use peer filter-policy to configure an ACL-based filter policy for a peer or peer group.
Use undo peer filter-policy to remove the configuration.
Syntax
peer { group-name | ip-address } filter-policy acl-number { export | import }
undo peer { group-name | ip-address } filter-policy [ acl-number ] { export | import }
Default
No ACL-based filter policy is configured for a peer or peer group.
Views
BGP view
Default command level
2: System level
Parameters
group-name: Specifies the name of a peer group, a string of 1 to 47 characters.
ip-address: Specifies the IP address of a peer.
acl-number: Specifies the ACL number, in the range of 2000 to 3999.
export: Applies the filter-policy to routes advertised to the peer/peer group.
import: Applies the filter-policy to routes received from the peer/peer group.
Examples
# In BGP view, apply the ACL 2000 to filter routes advertised to the peer group test.
<Sysname> system-view
[Sysname] bgp 100
[Sysname-bgp] peer test filter-policy 2000 export
Related commands
peer as-path-acl
peer group (BGP view)
Use peer group to add a peer to a peer group.
Use undo peer group to delete a specified peer from a peer group.
Syntax
peer ip-address group group-name [ as-number as-number ]
undo peer ip-address group group-name