F3215-HP Load Balancing Module Network Management Command Reference-6PW101

298
value: Preferred value, in the range of 0 to 65535.
Usage guidelines
Routes learned from a peer have an initial preferred value. Among multiple routes that have the same
destination/mask and are learned from different peers, the one with the greatest preferred value is
selected as the route to the destination.
If you both reference a routing policy and use the peer { group-name | ip-address } preferred-value value
command to set a preferred value for routes from a peer, the routing policy sets the specified preferred
value for routes matching it. Other routes not matching the routing policy uses the value set with the
command. If the preferred value specified in the routing policy is zero, the routes matching it will also use
the value set with the peer { group-name | ip-address } preferred-value value command. For information
about using a routing policy to set a preferred value, see the command peer { group-name | ip-address }
route-policy route-policy-name { export | import } in this document, and the command apply
preferred-value preferred-value in "Routing policy configuration commands."
Examples
# I n B G P vi e w, c o nfi g u re t h e p r e f e rr e d v a l u e a s 50 f or ro u t e s f r o m p e e r 131.10 8 .1.1.
<Sysname> system-view
[Sysname] bgp 100
[Sysname-bgp] peer 131.108.1.1 preferred-value 50
peer public-as-only (BGP view)
Use peer public-as-only to not keep private AS numbers in BGP updates sent to a peer/peer group.
Use undo peer public-as-only to keep private AS numbers in BGP updates sent to a peer/peer group.
Syntax
peer { group-name | ip-address } public-as-only
undo peer { group-name | ip-address } public-as-only
Default
BGP updates carry private AS numbers.
Views
BGP view
Default command level
2: System level
Parameters
group-name: Specifies the name of a peer group, a string of 1 to 47 characters.
ip-address: Specifies the IP address of a peer.
Usage guidelines
The command does not take effect if the BGP update has both public and private AS numbers. The range
of private AS number is from 64512 to 65535.
Examples
# In BGP view, carry no private AS number in BGP updates sent to the peer group test.
<Sysname> system-view
[Sysname] bgp 100