F3215-HP Load Balancing Module Network Management Command Reference-6PW101

19
shutdown
Use shutdown to shut down an Ethernet interface or subinterface.
Use undo shutdown to bring up an Ethernet interface or subinterface.
Syntax
shutdown
undo shutdown
Default
Ethernet interfaces and subinterfaces are up.
Views
Ethernet interface view, Ethernet subinterface view
Default command level
2: System level
Usage guidelines
You may need to shut down and then bring up an Ethernet interface to activate configuration changes
such as speed or duplex mode changes.
Examples
# Shut down and then bring up GigabitEthernet 0/1.
<Sysname> system-view
[Sysname] interface gigabitethernet 0/1
[Sysname-GigabitEthernet0/1] shutdown
[Sysname-GigabitEthernet0/1] undo shutdown
# Shut down and then bring up GigabitEthernet 0/1.1.
<Sysname> system-view
[Sysname] interface gigabitethernet 0/1.1
[Sysname-GigabitEthernet0/1.1] shutdown
[Sysname-GigabitEthernet0/1.1] undo shutdown
speed
Use speed to set the speed of an Ethernet interface.
Use undo speed to restore the default.
Syntax
speed { 10 | 100 | 1000 | auto }
undo speed
Views
Ethernet interface view
Default
An Ethernet interface negotiates a speed with its peer.