F3215-HP Load Balancing Module Network Management Command Reference-6PW101

326
Views
Any view
Default command level
1: Monitor level
Parameters
vpn-instance vpn-instance-name: Specifies a VPN by its name, a case-sensitive string of 1 to 31
characters. Without this option, the command displays routing information for the public network.
|: Filters command output by specifying a regular expression. For more information about regular
expressions, see System Management Configuration Guide.
begin: Displays the first line that matches the specified regular expression and all lines that follow.
exclude: Displays all lines that do not match the specified regular expression.
include: Displays all lines that match the specified regular expression.
regular-expression: Specifies a regular expression, a case-sensitive string of 1 to 256 characters.
Examples
# Display IPv4 route statistics for the public network.
<Sysname> display ip routing-table statistics
Proto route active added deleted freed
DIRECT 24 4 25 1 0
STATIC 4 1 4 0 0
RIP 0 0 0 0 0
OSPF 0 0 0 0 0
BGP 0 0 0 0 0
Total 28 5 29 1 0
Table 68 Command output
Field Descri
p
tion
Proto Origin of the routes.
route Number of routes from the origin.
active Number of active routes from the origin.
added
Number of routes added into the routing table since the router started up or the routing
table was last cleared.
deleted Number of routes marked as deleted, which will be cleared after a period.
freed Number of routes that got freed (removed permanently)
Total Total number of routes.
reset ip routing-table statistics protocol
Use reset ip routing-table statistics protocol to clear IPv4 route statistics.
Syntax
reset ip routing-table statistics protocol { protocol | all }