F3215-HP Load Balancing Module Network Management Command Reference-6PW101

334
# Display PBR configuration on GigabitEthernet 0/1.
<Sysname> display ip policy-based-route setup interface gigabitethernet 0/1
Interface GigabitEthernet0/1 policy based routing configuration information:
policy-based-route: pr01
permit node 1
if-match acl 3101
apply output-interface GigabitEthernet 0/2
# Display local PBR configuration.
<Sysname> display ip policy-based-route setup local
Local policy based routing configuration information:
policy-based-route: pr01
permit node 1:
if-match acl 3101
apply output-interface GigabitEthernet 0/2
Table 71 Command output
Field Descri
p
tion
policy Name Policy name.
interface
Interface where the policy is applied. Local means the
policy is applied locally.
Interface GigabitEthernet0/1 policy based routing
configuration information
PBR configuration on GigabitEthernet 0/1.
Local policy based routing configuration information Local PBR information.
policy-based-route Policy name.
permit node The match mode is permit.
if-match acl Match packets against ACL.
apply output-interface Serial2/0 Specify the output interface.
display ip policy-based-route statistics
Use display ip policy-based-route statistics to display PBR statistics.
Syntax
display ip policy-based-route statistics { interface interface-type interface-number | local } [ | { begin |
exclude | include } regular-expression ]
Views
Any view
Default command level
1: Monitor level
Parameters
interface interface-type interface-number: Displays the statistics of PBR on the specified interface.
local: Displays the statistics of local PBR.