F3215-HP Load Balancing Module Network Management Command Reference-6PW101

336

Parameters

policy-name: Displays information about the specified policy. A policy name is a string of 1 to 19

characters.

|: Filters command output by specifying a regular expression. For more information about regular

expressions, see System Management Configuration Guide.

begin: Displays the first line that matches the specified regular expression and all lines that follow.

exclude: Displays all lines that do not match the specified regular expression.

include: Displays all lines that match the specified regular expression.

regular-expression: Specifies a regular expression, a case-sensitive string of 1 to 256 characters.

Usage guidelines

If no policy name is specified, this command displays information about all policies.

If a policy is specified, this command displays information about the specified policy.

Examples

# Display the PBR policy information.

<Sysname> display policy-based-route

Policy based routing configuration information:

policy-based-route : aaa

Node 1 permit :

apply output-interface GigabitEthernet0/2

Table 73 Command output

Field Descri

tion

policy-based-route Policy name.

Node 1 permit The match mode of Node 1 is permit.

apply output-interface Specify the output interface.

if-match acl

Use if-match acl to configure an ACL match criterion.

Use undo if-match acl to remove the ACL match criterion.

Syntax

if-match acl acl-number

undo if-match acl

Views

Policy node view

Default command level

2: System level