F3215-HP Load Balancing Module Network Management Command Reference-6PW101

397
Field Descri
p
tion
Poison-reverse
Indicates whether the poison reverse function is enabled:
• on—Enabled.
• off—Disabled.
MetricIn/MetricOut Additional metric to incoming and outgoing routes.
Default route
• Only/Originate—Only means that the interface advertises only the default
route. Originate means that the default route and other RIPng routes are
advertised.
• Off—No default route is advertised or the garbage-collect time expires after
the default route advertisement was disabled.
• In garbage-collect status—With default route advertisement disabled, the
interface advertises the default route with metric 16 during the
garbage-collect time.
Summary address Summarized IPv6 prefix and summary IPv6 prefix on the interface.
display ripng route
Use display ripng route to display all RIPng routes and timers associated with each route of a RIPng
process.
Syntax
display ripng process-id route [ | { begin | exclude | include } regular-expression ]
Views
Any view
Default command level
1: Monitor level
Parameters
process-id: RIPng process ID, in the range of 1 to 65535.
|: Filters command output by specifying a regular expression. For more information about regular
expressions, see System Management Configuration Guide.
begin: Displays the first line that matches the specified regular expression and all lines that follow.
exclude: Displays all lines that do not match the specified regular expression.
include: Displays all lines that match the specified regular expression.
regular-expression: Specifies a regular expression, a case-sensitive string of 1 to 256 characters.
Examples
# Display the routing information of RIPng process 100.
<Sysname> display ripng 100 route
Route Flags: A - Aging, S - Suppressed, G - Garbage-collect
----------------------------------------------------------------
Peer FE80::200:5EFF:FE04:B602 on GigabitEthernet0/1
Dest 3FFE:C00:C18:1::/64,