F3215-HP Load Balancing Module Network Management Command Reference-6PW101

402
Syntax
maximum load-balancing number
undo maximum load-balancing
Default
The maximum number of ECMP routes is 8.
Views
RIPng view
Default command level
2: System level
Parameters
number: Maximum number of ECMP routes in the range of 1 to 8.
Usage guidelines
Configure the maximum number of ECMP routes according to the memory size.
Examples
# Set the maximum number of ECMP routes to 2.
<Sysname> system-view
[Sysname] ripng 100
[Sysname-ripng-100] maximum load-balancing 2
preference
Use preference to specify the preference for RIPng routes.
Use undo preference to restore the default.
Syntax
preference [ route-policy route-policy-name ] preference
undo preference [ route-policy ]
Default
The preference of RIPng routes is 100.
Views
RIPng view
Default command level
2: System level
Parameters
route-policy-name: Routing policy name with 1 to 63 case-sensitive characters.
value: Preference for RIPng routes, in the range of 1 to 255.
Usage guidelines
You can specify a routing policy by using the keyword route-policy to set a preference for the matching
RIPng routes.