F3215-HP Load Balancing Module Network Management Command Reference-6PW101

407
Syntax
ripng metricout value
undo ripng metricout
Default
The default additional routing metric is 1.
Views
Interface view
Default command level
2: System level
Parameters
value: Additional metric to advertised routes, in the range of 1 to 16.
Examples
# Set the additional metric to 12 for routes advertised by GigabitEthernet 0/1.
<Sysname> system-view
[Sysname] interface gigabitethernet0/1
[Sysname-GigabitEthernet0/1] ripng metricout 12
Related commands
ripng metricin
ripng poison-reverse
Use ripng poison-reverse to enable the poison reverse function.
Use undo ripng poison-reverse to disable the poison reverse function.
Syntax
ripng poison-reverse
undo ripng poison-reverse
Default
The poison reverse function is disabled.
Views
Interface view
Default command level
2: System level
Examples
# Enable the poison reverse function for RIPng update messages on GigabitEthernet 0/1.
<Sysname> system-view
[Sysname] interface gigabitethernet0/1
[Sysname-GigabitEthernet0/1] ripng poison-reverse