F3215-HP Load Balancing Module Network Management Command Reference-6PW101

418
OSPFv3 Process (1), Area 0.0.0.1, Instance ID 0
Router ID 2.2.2.2, Network Type POINTOPOINT, Cost: 1562
Transmit Delay is 1 sec, State Point-To-Point, Priority 1
No designated router on this link
No backup designated router on this link
Timer interval configured, Hello: 10, Dead: 40, Wait: 40, Retransmit: 5
Hello due in 00:00:02
Neighbor Count is 1, Adjacent neighbor count is 1
Table 94 Command output
Field Descri
p
tion
Interface ID Interface ID.
IPv6 Prefixes IPv6 Prefix.
OSPFv3 Process OSPFv3 Process.
Area Area ID.
Instance ID Instance ID.
Router ID Router ID.
Network Type Network type of the interface.
Cost Cost value of the interface.
Transmit Delay Transmission delay of the interface.
State Interface state.
Priority DR priority of the interface.
No designated router on this link No designated router on this link.
No backup designated router on this link No backup designated router on this link.
Timer interval configured
Time intervals in seconds configured on the interface:
• Hello—Hello interval.
• Dead—Dead interval.
• Wait—After this timer expires, the interface quits
from the waiting state.
• Retransmit—LSA retransmission interval.
Hello due in 00:00:02 Hello packet will be sent in 2 seconds.
Neighbor Count Number of Neighbors on the interface.
Adjacent neighbor count Number of Adjacencies on the interface.
display ospfv3 lsdb
Use display ospfv3 lsdb to display OSPFv3 LSDB information.
Syntax
display ospfv3 [ process-id ] lsdb [ { external | inter-prefix | inter-router | intra-prefix | link | network
| router } [ link-state-id ] [ originate-router router-id ] | total ] [ | { begin | exclude | include }
regular-expression ]