F3215-HP Load Balancing Module Network Management Command Reference-6PW101

427
Field Descri
p
tion
2-Way
Indicates that mutual communication between the router and its neighbor is available.
DR/BDR election is finished under this state (or higher).
ExStart
In this state, the router decides on the initial DD sequence number and master/slave
relationship of the two parties.
Exchange In this state, the router exchanges DD packets with the neighbor.
Loading In this state, the router sends LSRs to request the neighbor for needed LSAs.
Full Indicates that LSDB synchronization has been accomplished between neighbors.
Total Total number of neighbors under the same state.
display ospfv3 request-list
Use display ospfv3 request-list to display OSPFv3 link state request list information.
Syntax
display ospfv3 [ process-id ] request-list [ { external | grace | inter-prefix | inter-router | intra-prefix |
link | network | router } [ link-state-id ] [ originate-router ip-address ] | statistics ] [ | { begin | exclude
| include } regular-expression ]
Views
Any view
Default command level
1: Monitor level
Parameters
process-id: OSPFv3 process ID, in the range of 1 to 65535.
external: Displays the AS-external LSA information of the OSPFv3 link state request list.
grace: Displays the Grace-LSA information of the OSPFv3 link state request list.
inter-prefix: Displays the Inter-area-prefix LSA information of the OSPFv3 link state request list.
inter-router: Displays the Inter-area-router LSA information of the OSPFv3 link state request list.
intra-prefix: Displays the Intra-area-prefix LSA information of the OSPFv3 link state request list.
link: Displays the Link LSA information of the OSPFv3 link state request list.
network: Displays the Network-LSA information of the OSPFv3 link state request list.
router: Displays the Router-LSA information of the OSPFv3 link state request list.
link-state-id: Link state ID, in the format of an IPv4 address.
originate-router ip-address: Specifies the router ID of an advertising router.
statistics: Displays the LSA statistics of the OSPFv3 link state request list.
|: Filters command output by specifying a regular expression. For more information about regular
expressions, see System Management Configuration Guide.
begin: Displays the first line that matches the specified regular expression and all lines that follow.
exclude: Displays all lines that do not match the specified regular expression.