F3215-HP Load Balancing Module Network Management Command Reference-6PW101

429
Syntax
display ospfv3 [ process-id ] retrans-list [ { external | grace | inter-prefix | inter-router | intra-prefix |
link | network | router } [ link-state-id ] [ originate-router ip-address ] | statistics ] [ | { begin | exclude
| include } regular-expression ]
Views
Any view
Default command level
1: Monitor level
Parameters
process-id: OSPFv3 process ID, in the range of 1 to 65535.
external: Displays the AS-external LSA information of the OSPFv3 link state retransmission list.
grace: Displays the Grace-LSA information of the OSPFv3 link state retransmission list.
inter-prefix: Displays the Inter-area-prefix LSA information of the OSPFv3 link state retransmission list.
inter-router: Displays the Inter-area-router LSA information of the OSPFv3 link state retransmission list.
intra-prefix: Displays the Intra-area-prefix LSA information of the OSPFv3 link state retransmission list.
link: Displays the Link LSA information of the OSPFv3 link state retransmission list.
network: Displays the Network-LSA information of the OSPFv3 link state retransmission list.
router: Displays the Router-LSA information of the OSPFv3 link state retransmission list.
link-state-id: Link state ID, in the format of an IPv4 address.
originate-router ip-address: Specifies the router ID of an advertising router.
statistics: Displays the LSA statistics of the OSPFv3 link state retransmission list.
|: Filters command output by specifying a regular expression. For more information about regular
expressions, see System Management Configuration Guide.
begin: Displays the first line that matches the specified regular expression and all lines that follow.
exclude: Displays all lines that do not match the specified regular expression.
include: Displays all lines that match the specified regular expression.
regular-expression: Specifies a regular expression, a case-sensitive string of 1 to 256 characters.
Usage guidelines
If no process is specified, the link state retransmission list information of all OSPFv3 processes is
displayed.
Examples
# Display the information of the OSPFv3 link state retransmission list.
<Sysname> display ospfv3 retrans-list
OSPFv3 Router with ID (11.1.1.1) (Process 1)
Interface GE0/1 Area-ID 0.0.0.0
--------------------------------------------------------------------------
Nbr-ID 12.1.1.1
LS-Type LS-ID AdvRouter SeqNum Age CkSum
Link-LSA 0.15.0.24 12.1.1.1 0x80000003 519 0x7823