F3215-HP Load Balancing Module Network Management Command Reference-6PW101

439
log-peer-change
Use log-peer-change to enable the logging on neighbor state changes.
Use undo log-peer-change to disable the logging.
Syntax
log-peer-change
undo log-peer-change
Views
OSPFv3 view
Default command level
2: System level
Usage guidelines
With this feature enabled, information about neighbor state changes of the current OSPFv3 process will
display on the configuration terminal.
Examples
# Disable the logging on neighbor state changes of OSPFv3 process 100.
<Sysname> system-view
[Sysname] ospfv3 100
[Sysname-ospfv3-100] undo log-peer-change
maximum load-balancing (OSPFv3 view)
Use maximum load-balancing to configure the maximum number of equal-cost multi-path (ECMP) routes
for load balancing.
Use undo maximum load-balancing to restore the default.
Syntax
maximum load-balancing maximum
undo maximum load-balancing
Default
The maximum number of ECMP routes is 8.
Views
OSPFv3 view
Default command level
2: System level
Parameters
maximum: Maximum number of ECMP routes in the range of 1 to 8.
Examples
# Configure the maximum number of ECMP routes as 6.
<Sysname> system-view
[Sysname] ospfv3 1