F3215-HP Load Balancing Module Network Management Command Reference-6PW101

455
If you do not provide the ibgp or the ebgp keyword, this command configures load balancing for all IPv6
BGP routes.
After you execute the balance ibgp number or the balance ebgp number command, the balance number
command cannot be executed. To execute the balance number command, you must first use the undo
form of the balance ibgp number or balance ebgp number command to remove the former configuration.
Examples
# Set the number of IPv6 BGP ECMP routes to 2.
<Sysname> system-view
[Sysname] bgp 100
[Sysname-bgp] ipv6-family
[Sysname-bgp-af-ipv6] balance 2
# Set the number of IPv6 IBGP ECMP routes to 2.
<Sysname> system-view
[Sysname] bgp 100
[Sysname-bgp] ipv6-family
[Sysname-bgp-af-ipv6] balance ibgp 2
# Set the number of IPv6 EBGP routes to 2.
<Sysname> system-view
[Sysname] bgp 100
[Sysname-bgp] ipv6-family
[Sysname-bgp-af-ipv6] balance ebgp 2
Related commands
display bgp ipv6 routing-table
bestroute as-path-neglect (IPv6 address family view)
Use bestroute as-path-neglect to configure the IPv6 BGP router to not evaluate the AS_PATH during best
route selection.
Use undo bestroute as-path-neglect to configure the IPv6 BGP router to use the AS_PATH during best
route selection.
Syntax
bestroute as-path-neglect
undo bestroute as-path-neglect
Default
The router takes AS_PATH as a factor when selecting the best route.
Views
IPv6 address family view
Default command level
2: System level
Examples
# Ignore AS_PATH in route selection.
<Sysname> system-view