F3215-HP Load Balancing Module Network Management Command Reference-6PW101

465
Syntax
display bgp ipv6 peer [ group-name log-info | ipv4-address verbose | ipv6-address { log-info |
verbose } | verbose ] [ | { begin | exclude | include } regular-expression ]
Views
Any view
Default command level
1: Monitor level
Parameters
group-name: Name of an IPv4 or IPv6 peer group, a string of 1 to 47 characters.
ipv4-address: IPv4 address of a peer.
ipv6-address: Specifies the IPv6 address of a peer to be displayed.
log-info: Displays log information of the specified peer.
verbose: Displays the detailed information of the peer.
|: Filters command output by specifying a regular expression. For more information about regular
expressions, see System Management Configuration Guide.
begin: Displays the first line that matches the specified regular expression and all lines that follow.
exclude: Displays all lines that do not match the specified regular expression.
include: Displays all lines that match the specified regular expression.
regular-expression: Specifies a regular expression, a case-sensitive string of 1 to 256 characters.
Usage guidelines
If no parameter is specified, information about all peers and peer groups is displayed.
Examples
# Display all IPv6 peer information.
<Sysname> display bgp ipv6 peer
BGP local router ID : 192.168.1.40
Local AS number : 100
Total number of peers : 1 Peers in established state : 0
Peer AS MsgRcvd MsgSent OutQ PrefRcv Up/Down State
2001::1 100 0 0 0 0 00:02:02 Active
Table 117 Command output
Field Descri
p
tion
BGP local router ID Local router ID.
Local AS number Local AS number.
Total number of peers Total number of BGP peers.
Peers in established
state
Number of established BGP peers.