F3215-HP Load Balancing Module Network Management Command Reference-6PW101

471
*> Network : 40:40:: PrefixLen : 64
NextHop : 40:40::40:1 LocPrf :
PrefVal : 0 Label : NULL
MED : 0
Path/Ogn: i
Table 121 Command output
Field Descri
p
tion
Local router ID Local router ID.
Status codes
Status codes:
• * – valid—Valid route.
• ^ - VPNv4 best—Best VPNv4 route.
• > – best—Best route.
• d – damped—Dampened route.
• h – history—History route.
• i – internal—Internal route.
• s –suppressed—Suppressed route.
• S – Stale—Stale route.
Origin
Origin attributes:
• i – IGP—Originated in the AS.
• e – EGP—Learned through EGP.
• ? – incomplete—Learned by other means.
Network Destination network address.
PrefixLen Prefix length.
NextHop Next hop.
MED Multi-Exit Discriminator attribute.
LocPrf Local preference value.
Path AS_PATH attribute, recording the ASs the packet has passed to avoid routing loops.
PrefVal Preferred value.
Ogn
Origin attribute of the route:
• i—A route is interior to the AS. Summary routes and the routes configured using
the network command are considered IGP routes.
• e—A route is learned from the exterior gateway protocol (EGP).
• ?—Short for INCOMPLETE. It indicates that the origin of a route is unknown and
the route is learned by other means. BGP sets Origin attribute of routes learned
from other IGP protocols to INCOMPLETE.
display bgp ipv6 routing-table as-path-acl
Use display bgp ipv6 routing-table as-path-acl to display routes filtered through the specified AS path
ACL.
Syntax
display bgp ipv6 routing-table as-path-acl as-path-acl-number [ | { begin | exclude | include }
regular-expression ]