F3215-HP Load Balancing Module Network Management Command Reference-6PW101

473
&<1-13>: Indicates that the argument before it can be entered up to 13 times.
no-advertise: Displays IPv6 BGP routes that cannot be advertised to any peer.
no-export: Displays IPv6 BGP routes that cannot be advertised out of the AS; if a confederation exists, it
displays IPv6 BGP routes that cannot be advertised out of the confederation, but can be advertised to
other sub ASs in the confederation.
no-export-subconfed: Displays IPv6 BGP routes that cannot be advertised out of the AS or to other sub
ASs if a confederation is configured.
whole-match: Displays the IPv6 BGP routes exactly matching the specified community attribute.
|: Filters command output by specifying a regular expression. For more information about regular
expressions, see System Management Configuration Guide.
begin: Displays the first line that matches the specified regular expression and all lines that follow.
exclude: Displays all lines that do not match the specified regular expression.
include: Displays all lines that match the specified regular expression.
regular-expression: Specifies a regular expression, a case-sensitive string of 1 to 256 characters.
Examples
# Display the routing information with community attribute no-export.
<Sysname> display bgp ipv6 routing-table community no-export
BGP Local router ID is 30.30.30.1
Status codes: * - valid, ^ - VPNv4 best, > - best, d - damped,
h - history, i - internal, s - suppressed, S - Stale
Origin : i - IGP, e - EGP, ? - incomplete
*> Network : 30:30:: PrefixLen : 64
NextHop : 30:30::30:1 LocPrf :
PrefVal : 0 Label : NULL
MED : 0
Path/Ogn: i
For command output, see Table 121.
display bgp ipv6 routing-table community-list
Use display bgp ipv6 routing-table community-list to view the routing information matching the specified
IPv6 BGP community list.
Syntax
display bgp ipv6 routing-table community-list { { basic-community-list-number | comm-list-name }
[ whole-match ] | adv-community-list-number } [ | { begin | exclude | include } regular-expression ]
Views
Any view
Default command level
1: Monitor level
Parameters
basic-community-list-number: Specifies a basic community-list number, in the range of 1 to 99.