F3215-HP Load Balancing Module Network Management Command Reference-6PW101

483
group (IPv6 address family view)
Use group to create a peer group.
Use undo group to delete a peer group.
Syntax
group ipv6-group-name [ internal | external ]
undo group ipv6-group-name
Views
IPv6 address family view
Default command level
2: System level
Parameters
ipv6-group-name: Name of an IPv6 peer group, a string of 1 to 47 characters.
internal: Creates an IBGP peer group.
external: Creates an EBGP peer group, which can be a group of another sub AS in the confederation.
Usage guidelines
An IBGP peer group will be created if neither internal nor external is selected.
Examples
# Create an IBGP peer group named test.
<Sysname> system-view
[Sysname] bgp 100
[Sysname] ipv6-family
[Sysname-bgp-af-ipv6] group test
import-route (IPv6 address family view/IPv6 BGP-VPN instance
view)
Use import-route to redistribute routes from another routing protocol.
Use undo import-route to remove the configuration.
Syntax
import-route protocol [ process-id [ med med-value | route-policy route-policy-name ] * ]
undo import-route protocol [ process-id ]
Default
IPv6 BGP does not redistribute routes from any routing protocol.
Views
IPv6 address family view, IPv6 BGP-VPN instance view