F3215-HP Load Balancing Module Network Management Command Reference-6PW101

495
Default command level
2: System level
Parameters
group-name: Name of an IPv4 or IPv6 peer group, a string of 1 to 47 characters.
ipv4-address: IPv4 address of a peer.
ipv6-address: IPv6 address of a peer.
route-policy-name: Name of a routing policy, a string of 1 to 63 characters.
Usage guidelines
Using this command does not require availability of the default route in the routing table. With this
command used, the router sends the default route unconditionally to the peer/peer group with the next
hop being itself.
Examples
# Advertise a default route to peer 1:2::3:4.
<Sysname> system-view
[Sysname] bgp 100
[Sysname-bgp] ipv6-family
[Sysname-bgp-af-ipv6] peer 1:2::3:4 default-route-advertise
peer description (IPv6 address family view)
Use peer description to configure the description information for a peer/peer group.
Use undo peer description to remove the description information of a peer/peer group.
Syntax
peer { ipv6-group-name | ipv6-address } description description-text
undo peer { ipv6-group-name | ipv6-address } description
Default
No description information is configured for a peer (group).
Views
IPv6 address family view
Default command level
2: System level
Parameters
ipv6-group-name: Name of a peer group, a string of 1 to 47 characters.
ipv6-address: IPv6 address of a peer.
description-text: Description information for the peer/peer group, a string of 1 to 79 characters.
Usage guidelines
You need create a peer/peer group before configuring a description for it.
Examples
# Configure the description for the peer group test as ISP1.