F3215-HP Load Balancing Module Network Management Command Reference-6PW101

497
Syntax
peer { ipv4-group-name | ipv4-address | ipv6-address } enable
undo peer { ipv4-group-name | ipv4-address | ipv6-address } enable
Default
No IPv4 peer or peer group is enabled.
Views
IPv6 address family view
Default command level
2: System level
Parameters
ipv4-group-name: Name of an IPv4 peer group, a string of 1 to 47 characters. The IPv4 peer group
should be created beforehand.
ipv4-address: IPv4 address of a peer.
ipv6-address: IPv6 address of a peer.
Usage guidelines
If an IPv4 peer or peer group is disabled, the router does not exchange routing information with it.
Examples
# E n a b l e p e e r 1.1.1.1.
<Sysname> system-view
[Sysname] bgp 100
[Sysname-bgp] ipv6-family
[Sysname-bgp-af-ipv6] peer 1.1.1.1 enable
# Enable peer 1::1.
<Sysname> system-view
[Sysname] bgp 100
[Sysname-bgp] ipv6-family
[Sysname-bgp-af-ipv6] peer 1::1 group group1
[Sysname-bgp-af-ipv6] peer 1::1 enable
peer fake-as (IPv6 address family view)
Use peer fake-as to configure a fake local AS number for a peer or peer group.
Use undo peer fake-as to remove the configuration.
Syntax
peer { ipv6-group-name | ipv6-address } fake-as as-number
undo peer { ipv6-group-name | ipv6-address } fake-as
Default
No fake local AS number is configured for a peer or peer group.
Views
IPv6 address family view