F3215-HP Load Balancing Module Network Management Command Reference-6PW101

37
• The maximum number of interface range names is only limited by the system resources. To
guarantee bulk interface configuration performance, configure fewer than 1000 interface range
names.
Examples
# Add GigabitEthernet 0/2 through GigabitEthernet 0/4 to interface range named myEthPort, and
enter the interface range view.
<Sysname> system-view
[Sysname] interface range name myEthPort interface gigabitethernet 0/2 to gigabitethernet
0/4
[Sysname-if-range-myEthPort]
# Enter the view of interface range named myEthPort.
<Sysname> system-view
[Sysname] interface range name myEthPort
[Sysname-if-range-myEthPort]