F3215-HP Load Balancing Module Network Management Command Reference-6PW101

514
Examples
# Set 50 as the cluster ID for the route reflector, which is one of multiple route reflectors in the cluster.
<Sysname> system-view
[Sysname] bgp 100
[Sysname-bgp] ipv6-family
[Sysname-bgp-af-ipv6] reflector cluster-id 50
Related commands
• peer reflect-client
• reflect between-clients
refresh bgp ipv6
Use refresh bgp ipv6 to soft reset specified IPv4/IPv6 BGP connections.
Syntax
refresh bgp ipv6 { ipv4-address | ipv6-address | all | external | group group-name | internal } { export
| import }
Views
User view
Default command level
1: Monitor level
Parameters
ipv4-address: Soft-resets the connection with an IPv4 BGP peer.
ipv6-address: Soft-resets the connection with an IPv6 BGP peer.
all: Soft-resets all IPv6 BGP connections.
external: Soft-resets EBGP connections.
group ipv6-group-name: Soft-resets connections with a peer group. The name of the peer group is a
string of 1 to 47 characters.
internal: Soft-resets IBGP connections.
export: Performs soft reset in outbound direction.
import: Performs soft reset in inbound direction.
Usage guidelines
With this feature, you can refresh the IPv4/IPv6 BGP routing table and apply a new available policy
without tearing down BGP connections.
To perform IPv4/IPv6 BGP soft reset, all routers in the network should support route-refresh. If a router not
supporting route refresh exists in the network, use the peer keep-all-routes command on the local router
to save all route updates before performing soft reset.
Examples
# Soft reset inbound IPv6 BGP connections.
<Sysname> refresh bgp ipv6 all import