F3215-HP Load Balancing Module Network Management Command Reference-6PW101

556

Syntax

if-match extcommunity ext-comm-list-number&<1-16>

undo if-match extcommunity [ ext-comm-list-number&<1-16> ]

Default

The match criterion is not configured.

Views

Routing policy view

Default command level

2: System level

Parameters

ext-comm-list-number: Specifies an extended community list by its number, in the range of 1 to 199.

&<1-16>: Indicates that the argument before it can be entered up to 16 times.

Examples

# Configure node 10 in permit mode of routing policy policy1 to match BGP routing information to

extended community lists 100 and 150.

<Sysname> system-view

[Sysname] route-policy policy1 permit node 10

[Sysname-route-policy] if-match extcommunity 100 150

if-match interface

Use if-match interface to specify interfaces for matching against the outbound interface of routing

information.

Use undo if-match interface to remove the match criterion.

Syntax

if-match interface { interface-type interface-number }&<1-16>

undo if-match interface [ interface-type interface-number ]&<1-16>