F3215-HP Load Balancing Module Network Management Command Reference-6PW101

Isolate-user-VLAN configuration commands

display isolate-user-vlan

Use display isolate-user-vlan to display the mapping between an isolate-user-VLAN and secondary

VLANs.

Syntax

display isolate-user-vlan [ isolate-user-vlan-id ] [ | { begin | exclude | include } regular-expression ]

Views

Any view

Default command level

1: Monitor level

Parameters

isolate-user-vlan-id: Specifies an isolate-user-VLAN ID, ranging from 1 to 4094.

|: Filters command output by specifying a regular expression. For more information about regular

expressions, see System Management Configuration Guide.

begin: Displays the first line that matches the specified regular expression and all lines that follow.

exclude: Displays all lines that do not match the specified regular expression.

include: Displays all lines that match the specified regular expression.

regular-expression: Specifies a regular expression, a case-sensitive string of 1 to 256 characters.

Examples

# Display the mapping between an isolate-user-VLAN and secondary VLANs.

<Sysname> display isolate-user-vlan

Isolate-user-VLAN VLAN ID : 2

Secondary VLAN ID : 3 4

VLAN ID: 2

VLAN Type: static

Isolate-user-VLAN type : isolate-user-VLAN

Route Interface: configured

IP Address: 1.1.1.1

Subnet Mask: 255.255.255.0

Description: VLAN 0002

Name: VLAN 0002

Tagged Ports: none

Untagged Ports:

GigabitEthernet0/2 GigabitEthernet0/3 GigabitEthernet0/4

VLAN ID: 3

VLAN Type: static