F3215-HP Load Balancing Module Network Management Command Reference-6PW101

74
Isolate-user-VLAN type : secondary
Route Interface: configured
IP Address: 2.2.2.2
Subnet Mask: 255.255.255.0
Description: VLAN 0003
Name: VLAN 0003
Tagged Ports: none
Untagged Ports:
GigabitEthernet0/2 GigabitEthernet0/3
VLAN ID: 4
VLAN Type: static
Isolate-user-VLAN type : secondary
Route Interface: not configured
Description: VLAN 0004
Name: VLAN 0004
Tagged Ports: none
Untagged Ports:
GigabitEthernet0/2 GigabitEthernet0/4
Table 17 Command output
Field Descri
p
tion
VLAN Type VLAN type (static or dynamic).
Isolate-user-VLAN type VLAN type (isolate-user-VLAN or secondary VLAN).
Route Interface Indicates whether a VLAN-interface is configured for the VLAN.
IP Address
IP address of the VLAN-interface, if configured. This field is not displayed
if no IP address is configured for the VLAN-interface.
Subnet Mask
Subnet mask of the VLAN-interface, if configured. This field is not
displayed if no mask is configured for the VLAN-interface.
Description VLAN description.
Name VLAN name.
Tagged Ports Ports through which packets of the VLAN are sent tagged.
Untagged Ports Ports through which packets of the VLAN are sent untagged.
Related commands
• isolate-user-vlan
• isolate-user-vlan enable
isolate-user-vlan
Use isolate-user-vlan to associate an isolate-user-VLAN with the specified secondary VLANs.
Use undo isolate-user-vlan to remove the association.
Syntax
isolate-user-vlan isolate-user-vlan-id secondary secondary-vlan-id [ to secondary-vlan-id ]