F3215-HP Load Balancing Module Network Management Configuration Guide-6PW101

99
Creating an address pool
1. From the navigation tree, select Security > NAT.
By default, the dynamic NAT configuration page appears.
Figure 56 Dynamic NAT configuration page
TIP:
You can click the ID link of an ACL to view details about the ACL, and create and delete ACL rules. For
more information about ACL configuration, see
Security Configuration Guide .
2. In the Address Pool area, click Add.
The Add NAT Address Pool page appears.
Figure 57 Adding NAT Address Pool page
3. Create an IP address pool as described in Table 7.
4. Click Apply.
Table 7 Configuration items
Item Descri
p
tion
Index Specify the index of an address pool.
Start IP Address Specify the start IP address of the address pool.