F3215-HP Load Balancing Module Network Management Configuration Guide-6PW101

107
Configuring ACL-based NAT on the internal server
1. From the navigation tree, select Security > NAT, and click the Internal Server tab.
The internal server configuration page as shown in Figure 62 appears.
2. In the Internal Server Based on ACL area, click Add.
Figure 65 Internal server based on ACL configuration
3. Configure an internal server based on ACL as described in Table 12.
4. Click Apply.
Table 12 Configuration items
Item Descri
p
tion
Interface Specify an interface to which the internal server policy is applied.
Protocol type Select the protocol to be carried by IP.
ACL
Enter the number of an ACL applied by the internal server policy.
If the ACL applied does not exist, the system do not create an ACL automatically.
After you specify an ACL in the ADD Internal Server Based on ACL page, select
Security > ACL to do more settings.
Internal VPN Instance
Select the box and select a VPN instance to which the internal server belongs.
If the internal server is a common private network server that does not belong to
any VPN instance, do not select the box.
Internal IP Enter the IP addresses of the internal server.
Internal Port
Enter the port number of the internal server.
This option is available when 6(TCP) or 17(UDP) is selected for the protocol type.
If you enter 0 in the field, all types of services are provided which indicates a
static connection exists between the internal address and external address.
Configuring a DNS mapping
1. From the navigation tree, select Security > NAT, and click the Internal Server tab.
2. In the DNS-MAP area, click Add.
The page for adding DNS-MAP appears.