F3215-HP Load Balancing Module Network Management Configuration Guide-6PW101
109
c.
Enter 2001 in ACL Number, and click Apply.
Figure 68 Defining ACL 2001
d.
Click the icon in the operation column corresponding to ACL 2001 to enter the ACL 2001
configuration page.
e.
Click Add.
f.
On the page that appears, select Permit in Operation. Select the Source IP Address box and
enter 10.110.10.0. Enter 0.0.0.255 in Source Wildcard and click Apply.
g.
Click Add.
Figure 69 Configuring ACL 2001 to permit users on network 10.110.10.0/24 to access the Internet
h.
Click Add on the ACL 2001. Select Deny for Operation, and click Apply.
Figure 70 Configuring ACL 2001 to prohibit other users to access the Internet
2.
Configure a NAT address pool:
a.
From the navigation tree, select Security > NAT, and enter the Dynamic NAT tab by default.