F3215-HP Load Balancing Module Network Management Configuration Guide-6PW101

111
• External hosts can access internal servers using public address 202.38.1.1/24.
• Port 8080 is used for Web server 2.
Figure 73 Network diagram
Configuring the internal server
1. Configure the FTP server:
a. From the navigation tree, select Security > NAT, and click the Internal Server tab.
b. Click Add in the Internal Server area.
c. On the page that appears, select GigabitEthernet0/1 for Interface.
d. Select the Assign IP Address option, and enter 202.38.1.1.
e. Select the first option for Global Port and enter 21.
f. Enter 10.110.10.3 in the Internal IP field.
g. Select the service type ftp.
h. Click Apply.