F3215-HP Load Balancing Module Network Management Configuration Guide-6PW101

114
Figure 76 Configuring internal Web server 2
Configuring NAT at the CLI
NAT configuration task list
Task Remarks
Configure address translation:
• Configuring static NAT
• Configuring dynamic NAT
Either is required.
Configuring an internal server Required.
Configuring DNS mapping Optional.
If the NAT configuration (address translation or internal server configuration) on an interface is changed,
save the configuration and reboot the device, to avoid the following problems:
• After you delete the NAT-related configuration, address translation can still work for sessions
already created.
• If you configure NAT when NAT is running, the same configuration may have different results
because of different configuration orders.
Configuring static NAT
Static NAT supports NAT multiple-instance as long as the VPN instance of an IP address is provided.
Static NAT supports two modes: one-to-one and net-to-net.