F3215-HP Load Balancing Module Network Management Configuration Guide-6PW101

152
2. Configure the DNS server address:
a. Click Add IP.
Figure 102 Configuring a DNS server address
b. Enter 2.1.1.2 for DNS Server IP Address.
c. Click Apply.
3. Configure the domain name suffix:
a. Click Add Suffix.
Figure 103 Configure the domain name suffix
b. Enter com for DNS Domain Name Suffix.
c. Click Apply.
Verifying the configuration
On the DNS client, ping the host name host. The communication between the LB module and the host is
normal and the corresponding destination IP address is 3.1.1.1.
Configuring the IPv4 DNS at the CLI
Configuring static domain name resolution
Configuring static domain name resolution refers to specifying the mappings between host names and
IPv4 addresses. Static domain name resolution allows applications such as Telnet to contact hosts by
using host names instead of IPv4 addresses.
To configure static domain name resolution:
Ste
p
Command Remarks
1. Enter system view.
system-view N/A